INSTALLATION PLATINUM KIT USE STEPS 1-6 / GOLD USE STEPS 1-3

STEP 1

Align "THE BULWARK" over the Deadbolt and lock opening, pre drill all nine holes with a 1/8" x 4" or longer drill bit to penetrate the stud behind the frame.

STEP 2

STEP 1

Install all nine of the 3-1/2" white screws into the pre drilled holes.

STEP 3

STEP 1

STEP 3

Install the lock shield lining up the openings for the Deadbolt and lock with the beveled edge facing out.
note: No need to pre drill

STEP 4

STEP 3

Install the hinge shield over the middle and bottom hinge on the doors edge.
note: No need to pre drill

STEP 5

STEP 4

STEP 5

Remove the two short screws from the middle and bottom hinge on the frame side closest to the outside

STEP 6

STEP 4

STEP 5

Pre drill the two holes in each hinge. Install the yellow zinc 3-1/2" into the pre drilled holes in the middle and bottom hinge

The Bulwark, is your first layer of home protection!

"The Bulwark" Door Kick in Protection

INSTALLATION PLATINUM KIT USE STEPS 1-6 / GOLD USE STEPS 1-3

STEP 1

STEP 1

STEP 1

STEP 2

STEP 1

STEP 1

STEP 3

STEP 1

STEP 3

STEP 4

STEP 4

STEP 3

STEP 5

STEP 4

STEP 5

STEP 6

STEP 4

STEP 5